FOOD SERVICE

Food service or catering industry defines those businesses, institutions, and companies responsible for any meal prepared outside the home. This industry includes restaurants, school and hospital cafeterias, catering operations, and many other formats.

The companies that supply foodservice operators sell goods like small wares (kitchen utensils) and foods. Some companies manufacture products in both consumer and foodservice versions.

PRODUCTS

The AMP Chiller Cold Rooms are manufactured in our Industry in Kryoneri Industrial Area of Athens with highly accurate latest technology machinery.
They are air-tight for maximum economy on energy. Certified with CE 89/106 EN13241-1 (EN 89/106 / EK).

• The panels are connected sealed with three thermal barriers with the German snap-in-system.
• Ôhe kunststoff profiles, that cover the narrow sides of the panels and cut the thermal bridges, connect the side panels with the floor and the ceiling.
• Four angle panels of strong construction that ease the connection of the sides as if it was a straight line.
• The panels seal tightly at the connections with special sealing flanges from neoprene, perimetrically at the ceiling and the floor. Ensured cooling energy.
• Steel sheets lining of 0,55 mm thickness, with polyester anti-toxic coating NSF and protective foil.
• There is option for Inox 304 panel surface for both inside and outside of the panel, or for one of the sides (customer`s choice).
• Polyurethane insulation from BAYER Germany, with ëR = 0,022 W/mk and density 42 – 45 kgr/m³.
• Frame from reinforced thick PVC in angle shape of German design covers all the thickness of the panel and is installed with the CPR system in 5 minutes with HACCP standards.
• Hinged and sliding doors of German technology in all dimensions with modern mechanisms.
• The dimensions of the cold rooms are expandable by 50 cm at the length and width. Special dimensions available without extra cost.
• Every freezer room is equipped with electric decompression valve.
• Study, design and specifications according to DIN from the Polytechnic University of Berlin.
• Compliance with HACCP regulation. Big saving of electrical energy.

The AMP Freezer Cold Rooms are manufactured in our Industry in Kryoneri Industrial Area of Athens with highly accurate latest technology machinery.
They are air-tight for maximum economy on energy. Certified with CE 89/106 EN13241-1 (EN 89/106 / EK).

• The panels are connected sealed with three thermal barriers with the German snap-in-system.
• The connection of the perimeter panels with those of the roof is made with modern (as Europe and America) that is using a packet with special flashings (backsplashes and F-shape for supporting the perimeter panels). For the connection of the side panels with the ceiling panel a step (with special machines) is created to prevent the escape of temperature-cooling.
• Four angle panels of strong construction that ease the connection of the sides as if it was a straight line.
• The panels seal tightly at the connections with special sealing flanges from neoprene, perimetrically at the ceiling and the floor. Ensured cooling energy.
• Steel sheets lining of 0,55 mm thickness, with polyester anti-toxic coating NSF and protective foil.
• There is option for Inox 304 panel surface for both inside and outside of the panel, or for one of the sides (customer`s choice).
• Polyurethane insulation from BAYER Germany, with ëR = 0,022 W/mk and density 42 – 45 kgr/m³.
• Frame from reinforced thick PVC in angle shape of German design covers all the thickness of the panel and is installed with the CPR system in 5 minutes with HACCP standards.
• Hinged and sliding doors of German technology in all dimensions with modern mechanisms.
• The dimensions of the cold rooms are expandable by 50 cm at the length and width. Special dimensions available without extra cost.
• Every freezer room is equipped with electric decompression valve.
• Study, design and specifications according to DIN from the Polytechnic University of Berlin.
• Compliance with HACCP regulation. Big saving of electrical energy.

The hinged cold storage doors AMP are being constructed in our industry at Kryoneri Attica by our trained personnel using German raw materials and the German expertise. The hinged doors are divided in several models MOD 608TP – 609TL – 612TXL – 612TXXL (depending on the temperature required). They are necessary for every cold room, they are perfectly adjustable, they have hermetically sealing and they keep the temperature in the preferable level. They are available for chillers and freezers and they can be constructed in all dimensions.

MOD 608TP up to 0° C
MOD 609TL up to -25° C
MOD 612TXL up to -30° C
MOD 612TXXL up to -40° C

Additional Information:
– Angle – shaped frame, made from heavy duty, robust and reinforced with marine plywood, PVC, with modern German design and high mechanical strength. In accordance with HACCP standards. EASY-PASS (quick & easy assembly).
– Standard door leaf with Polyurethane insulation supplied from BAYER of density 42 kg/m³. Door surface made from German steel sheets 30% thicker than the competition, plasticized to a thickness of 200 ìm with Sanitary Steel film coating with antibacterial properties.
– Single section door. It locks in three points with 6 hinges.
– Lock mechanism & hinges for all hinged doors.
– Border gaskets, insulating properties with beehive cells and perfect adhesion.
– Wide colour range.
– Five year written guarantee. Certified with ISO 9001: 2015 & CE 89/106 ÅÍ13241-1.

The double leaf hinged cold storage doors AMP are being constructed in our industry at Kryoneri Attica by our trained personnel using German raw materials and the German expertise. The double leaf hinged doors are divided in several models MOD 608TP2 – 609TL2 – 612TXL2 – 612TXXL2 (depending on the temperature required). These doors are used for large openings. They are necessary for every cold room, they are perfectly adjustable, they have hermetically sealing and they keep the temperature in the preferable level. They are available for chillers and freezers and they can be constructed in all dimensions.

MOD 608TP2 up to 0° C
MOD 609TL2 up to -25° C
MOD 612TXL2 up to -30° C
MOD 612TXXL2 up to -40° C

Additional Information:
– Angle – shaped frame, made from heavy duty, robust and reinforced with marine plywood, PVC, with modern German design and high mechanical strength. In accordance with HACCP standards. EASY-PASS (quick & easy assembly).
– Standard door leaf with Polyurethane insulation supplied from BAYER of density 42 kg/m³. Door surface made from German steel sheets 30% thicker than the competition, plasticized to a thickness of 200 ìm with Sanitary Steel film coating with antibacterial properties.
– Single section door. It locks in three points with 6 hinges.
– Lock mechanism & hinges for all hinged doors.
– Border gaskets, insulating properties with beehive cells and perfect adhesion.
– Wide colour range.
– Five year written guarantee. Certified with ISO 9001: 2015 & CE 89/106 ÅÍ13241-1.

AMP Industry exclusively produces leaf sliding cold storage doors MOD 808TP – 809TP – 809TL – 812TXL – 812TXXL. The sliding doors can be used when the opening is bigger than 1,20m, when pallet trucks – clarks enter the cold room and in cases that the personnel has to open the doors very often. They are perfect for industries large cargo and in facilities where the continuous opening the door is required. The specifications and the manufacturing method applied make them ideal for food industries such as fruit packaging units, meat industries, dairies, logistics and more. The sliding cold storage doors by amp are divided in categories depending on the temperature required. They can be installed in both chiller and freezer rooms.

MOD 808TP up to 0° C
MOD 809TP up to -2° C
MOD 809TL up to -25° C
MOD 812TXL up to -30° C
MOD 812TXXL up to -40° C

Additional Information:
– Angle – shaped frame, made from heavy duty, robust and reinforced with PVC, with modern German design and high mechanical strength. In accordance with HACCP standards. EASY-PASS (quick & easy assembly).
– Standard door leaf with Polyurethane insulation supplied from BAYER (Germany) of density 42 kg/m³, with injection at heated press of 500 tonnes. Door surface made from German steel sheets 30% thicker than the competition, plasticized to a thickness of 200 ìm with Sanitary Steel film coating with antibacterial properties.
– Slide mechanism of modern design, exceptional sliding properties. Very soft closing and easy disengagement. Slide mechanism cover made from round, curved aluminium profile.
– Standard aluminum side panel, anodized, adapted to panels. It ensures perfect adhension at the gaskets, without extra components on the floor.
– External shutter Inox 304 of modern design, extra heavy duty lever.
– Border gaskets, insulating properties with Beehive cells and perfect adhesion, and with door heating element installed for the defrosting.

Five (5) year guarantee is included in the prices.

AMP Industry exclusively produces double leaf sliding cold storage doors MOD 808TP2 – 809TP2 – 809TL2 – 812TXL2 – 812TXXL2. The sliding doors can be used when the opening is bigger than 1,20m, when pallet trucks – clarks enter the cold room and in cases that the personnel has to open the doors very often. They are perfect for industries large cargo and in facilities where the continuous opening the door is required. The specifications and the manufacturing method applied make them ideal for food industries such as fruit packaging units, meat industries, dairies, logistics and more. The double leaf sliding cold storage doors by amp are divided in categories depending on the temperature required. They can be installed in both chiller and freezer rooms.

MOD 808TP2 up to 0° C
MOD 809TP2 up to -2° C
MOD 809TL2 up to -25° C
MOD 812TXL2 up to -30° C
MOD 812TXXL2 up to -40° C

Additional Information:
– Angle – shaped frame, made from heavy duty, robust and reinforced with PVC, with modern German design and high mechanical strength. In accordance with HACCP standards. EASY-PASS (quick & easy assembly).
– Standard door leaf with Polyurethane insulation supplied from BAYER (Germany) of density 42 kg/m³, with injection at heated press of 500 tonnes. Door surface made from German steel sheets 30% thicker than the competition, plasticized to a thickness of 200 ìm with Sanitary Steel film coating with antibacterial properties.
– Slide mechanism of modern design, exceptional sliding properties. Very soft closing and easy disengagement. Slide mechanism cover made from round, curved aluminium profile.
– Standard aluminum side panel, anodized, adapted to panels. It ensures perfect adhension at the gaskets, without extra components on the floor.
– External shutter Inox 304 of modern design, extra heavy duty lever.
– Border gaskets, insulating properties with Beehive cells and perfect adhesion, and with door heating element installed for the defrosting.

Five (5) year guarantee is included in the prices.

Amp industry, manufactures exclusively the Controlled Atmosphere Doors, a type of cold storage door which serves excellently in order to keep the temperature inside the Cold Room stable. Mod 809 AT-C is suitable Sliding door for cold room with controlled atmosphere in use up to -5°C minimum.
– For temperature up to -5°C
– Blade thickness 92mm
– Polyurethane density: 42Kg/m³

Mod 809 AT-C Cold storage door is suitable for controlled atmosphere cold room for vegetables and fruits preservation applications where a perfect gas tightness is required with operation temperature not lower than -5°C.
The double gasket system allows the application on cold room not constantly used in controlled atmosphere.

Door Leaf
– Leaf perimeter in anodized aluminium (thickness 92 mm).
– Leaf covered with plastisol steel sheet 200ìm that is food-safe, thickness 6/10 mm.
– Outside handle: lever inox 304.
– Inside handle:lever inox 304.
– Double density EPDM gasket on 3 sides.
– Low gasket in PVC.
– Inflatable gasket to be used during the period of ripening.
– Pressure gauge and inflating valve.
– Ispection window (600x800mm clear opening) provided with external lock and internal sofety opener and magnetic sealing gasket.

Frame and counter frame PVC
– Frame and side-frame in PVC ; the frame is thermo-welded (45°).
– Counter-frame in PVC, colour RAL 9010, thermo-welded (45°).
– Special threshold S/2 with the frame (2 jambs + 1 transom) partially put (60 mm) into the floor. At the bottom of the frame it’s fixed an “C” profile made of iron which is recessed into the floor. Only the upper part will result visible at the end of the work.

Sliding system
– The sliding system is made of:
1. Sliding profile in anodized aluminium, with safety mechanism.
2. Ramps, or falling bends, that ensure a perfect contact between the door and the frame they provide the best insulation between the inside and the outside of the cold room. They are assembled on the closing side of the door.
3. Cover (option), made in extruded anodized aluminium it can be simply opened thanks to the hinges assembled on its top, to realize inspection or cleaning services.
– The lower guide is made of:
1. Aluminium profile: assures the perfect straight sliding of the blade during the opening and the closing.
2. Clamp: thanks to its sloping level it assures the perfet closing of the couple door/frame.
3. Closing cap for the aluminium profile: it avoids the accumulation of microbes.

Door Leaf/frame system
– Plastic pulleys, by means of with the door slides along the sliding system; they are adjustable in height & in depth.
– Adjustable lower register, by means of with the door slides along the lower guide.
– Lower closing hook: it’s made of INOX304 and assembled on the closing side of the frame and during the closing it assures the hermetic contact between the door and the frame.
– Striker of the lower closing hook: it’s made of plastic and assembled on the blade, on the handle side. During the closing of the door it goes into the lower hook and assures the hermetic contact between the door and the frame.

OPTION:
PLCE automation device
Safety valve for inflatable system
External system provided with padlock closing system

Fire doors offer the safest solution to the cold storage doors, providing protection from the fire for more than 60 minutes. They are constructed with high technology fireproof materials and they bear CE EN 1634-1 certification, in order to ensure fire safety.

– Door leaf thickness 120mm providing insulation for low temperature freezer and positive temperature chiller doors.
– Galvanized sheet is used with external foodsafe antibacterial plastisol coating (250ìm).
– Inside the door high tech materials are combined with non flammable polyurethane according to DIN 4102-1.
– Non – flammable materials providing fire endurance up to 60min (door endured fire test for 78min).
– For thermal insulation, perimetrical on the door leaf special insulating gaskets are used. At the bottom of the door sweep gasket is used.
– Heating elements are used inside the frame and inside the threshold in chiller and freezer door.
– Stainless steel 304 frame insulated with high-tech materials, (sheet metal thickness 1,5mm).
– Heavy duty hinges (set of three pieces) used with self- closing mechanism.
– Fire rated exit door handle with or without key lock hole.
– Heavy duty fire tested door closer.
– Fire rated Panic Bar is mounted on the push side of the door with Steel latches.

Fire doors offer the safest solution to the cold storage doors, providing protection from the fire for more than 60 minutes. They are constructed with high technology fireproof materials and they bear CE EN 1634-1 certification, in order to ensure fire safety.

– Door leaf thickness 120mm providing insulation for low temperature freezer and positive temperature chiller doors.
– Galvanized sheet is used with external foodsafe antibacterial plastisol coating (250ìm).
– Non – flammable materials providing fire endurance up to 60min.
– Inside the door high tech materials are combined with non flammable polyurethane according to DIN 4102-1.
– Heating elements are used inside the frame and inside the threshold in freezer door.
– Insulated frame with high-tech materials made of Stainless steel 304 (sheet metal thickness 1,5mm).
– Stainless steel 304 sheet metal sliding guide fabrication (sheet metal thickness 2mm).
– Electronic accessories current at 12-24V.
– In case of fire, the door is automatically closed by autoclose mechanism, fire tested for use on fire protection sliding doors. Damper is used to ensure extra safety.
– Stainless steel heavy duty external and internal handle.
– Stainless steel wheels and brackets.
– Stainless steel sliding rail.

Double leaf Flip- flap AMP door. AMP Flip – Flap (dual action) doors can be dual or single sectional.

– German – supplied polyethylene sheets – panels of 15mm thickness with fixed oval fanlight, reinforced by antishock bars to resist impact from trolleys, pallet lifts and fork lift trucks. Available in several colours. That material is extremely resistant to fats, acids and cleaning substances. The door achieves an operational design, long lifetime without any maintenance costs.
– Transparent PVC panels, German – supplied, semi – rigid. They are reinforced by inner polyester mesh, in high – strength horizontal and vertical layout.
– All doors are suitable for laboratories, warehouses and indoor areas. They are paramount for cool boxes fitted with sliding doors. They shall be fitted with special mechanisms to provide automatic closing after each opening. They remain open when opened at 90°.
– The above doors are supplied at low prices, without compromising high quality.

Moreover, ÁÌÑ doors include the following:
– Options to select color from our swatch, upon demonstration to the client.
– Decorative, impact resistant bars (at your request).

Technical Specifications of the material: According to DIN EN ISO 1043.

Flip – Flap doors MOD FFPU2 of double leaf with BAYER Germany polyurethane insulation, free of chlorofluorocarbons (CFC & HCFC FREE), with sound insulation and thermal insulation properties.

The thickness of the door is 40mm, lined with galvanized German steel sheets coated with plastisol of 200 microns thickness and bearing perimetric aluminum profile (the frame) mounted opposite and pressed together with the polyurethane in order to maintain the door always flat.

A special insulating EPDM rubber with excellent grip is placed on the outer perimeter of the door. Another special rubber is placed at the middle of the two leaves that allows the correct opearation of the door, adhesion between the leaves and offers finger protection.

It is adapted to the panel with a frame from angular PVC and CPR counter frame, embracing solidly the panel on which the leaves of the door are mounted. They open inside-out and close immediately “after passing”, blocking the passage of insects, dust, odors & other and they remain open to 90 degrees angle.

Each door has fixed oval porthole mounted and has special protection ails (bumpers) from polyethylene, under the porthole, inside – out. This material is extremely resistant to impact and to grease and acids and is of modern design and aesthetics.

Single leaf Flip- flap AMP door. AMP Flip – Flap (dual action) doors can be dual or single sectional.

– German – supplied polyethylene sheets – panels of 15mm thickness with fixed oval fanlight, reinforced by antishock bars to resist impact from trolleys, pallet lifts and fork lift trucks. Available in several colours. That material is extremely resistant to fats, acids and cleaning substances. The door achieves an operational design, long lifetime without any maintenance costs.
– Transparent PVC panels, German – supplied, semi – rigid. They are reinforced by inner polyester mesh, in high – strength horizontal and vertical layout.
– All doors are suitable for laboratories, warehouses and indoor areas. They are paramount for cool boxes fitted with sliding doors. They shall be fitted with special mechanisms to provide automatic closing after each opening. They remain open when opened at 90°.
– The above doors are supplied at low prices, without compromising high quality.

Moreover, ÁÌÑ doors include the following:
– Options to select color from our swatch, upon demonstration to the client.
– Decorative, impact resistant bars (at your request).

Technical Specifications of the material: According to DIN EN ISO 1043.

Flip – Flap doors MOD FFPU1 of single leaf, with BAYER Germany polyurethane insulation, free of chlorofluorocarbons (CFC & HCFC FREE), with sound insulation and thermal insulation properties.

The thickness of the door is 40mm, lined with galvanized German steel sheets coated with plastisol of 200 microns thickness and bearing perimetric aluminum profile (the frame) mounted opposite and pressed together with the polyurethane in order to maintain the door always flat.

A special insulating EPDM rubber with excellent grip is placed on the outer perimeter of the door.

It is adapted to the panel with a frame from angular PVC and CPR counter frame, embracing solidly the panel on which the leaves of the door are mounted. They open inside-out and close immediately “after passing”, blocking the passage of insects, dust, odors & other and they remain open to 90 degrees angle.

Each door has fixed oval porthole mounted and has special protection ails (bumpers) from polyethylene, under the porthole, inside – out. This material is extremely resistant to impact and to grease and acids and is of modern design and aesthetics.

Applications: pharmaceutical industry, hospitals, clinics, clean rooms, surgeries, food preparation workshops.
Certified antibacterial coating for clean room doors

The clean room doors for sanitary applications carry a special coating film with antibacterial properties.
An antibacterial action is activated on environmental conditions that usually favor the proliferation of bacteria, fungi and algae. This antimicrobial coating has a dual effect, prevents the growth of microbes and fights those that may have been created.
The steel sheets with polyester coating with antibacterial properties, offer long-term protection and hygiene, even in places where cleaning is not guaranteed. The coating of clean room doors offers proven effectiveness against different types of bacteria such as staphylococcus, salmonella, escherichia coli, listeria etc.
They are certified specifically for food with the Certificate of EU Food Contact Compliance 2002/72 / EC.

Special rubber gasket for clean room doors
In order to meet the specifications for clean room doors, for areas for the manufacturing of drugs, surgeries, hospitals the gap between the door and the floor should be sealed, preventing the transportation of air, smoke, dust and sound.
It includes an aluminum profile guide, EPDM rubber (resistant to temperatures from – 35 ° to + 90 °) and supporting materials well reinforced to withstand more than 200,000 door openings-closings.
The mechanism works with a switch which regulates the movement of the profile with the rubber, thus adapting to the floor every time you open and close the door.

Applications: pharmaceutical industry, hospitals, clinics, clean rooms, surgeries, food preparation workshops.
Certified antibacterial coating for clean room doors

The double leaf clean room doors for sanitary applications carry a special coating film with antibacterial properties.
An antibacterial action is activated on environmental conditions that usually favor the proliferation of bacteria, fungi and algae. This antimicrobial coating has a dual effect, prevents the growth of microbes and fights those that may have been created.
The steel sheets with polyester coating with antibacterial properties, offer long-term protection and hygiene, even in places where cleaning is not guaranteed. The coating of clean room doors offers proven effectiveness against different types of bacteria such as staphylococcus, salmonella, escherichia coli, listeria etc.
They are certified specifically for food with the Certificate of EU Food Contact Compliance 2002/72/EC.

Special rubber gasket for clean room doors
In order to meet the specifications for clean room doors, for areas for the manufacturing of drugs, surgeries, hospitals the gap between the door and the floor should be sealed, preventing the transportation of air, smoke, dust and sound.
It includes an aluminum profile guide, EPDM rubber (resistant to temperatures from – 35° to + 90°) and supporting materials well reinforced to withstand more than 200,000 door openings-closings.
The mechanism works with a switch which regulates the movement of the profile with the rubber, thus adapting to the floor every time you open and close the door.

Amp industry, manufactures exclusively the stainless steel Controlled Atmosphere Doors, a type of cold storage door which serves excellently in order to keep the temperature inside the Cold Room stable. Mod 809 SAT-C is suitable Sliding door for cold room with controlled atmosphere in use up to -5°C minimum.
– For temperature up to -5°C
– Blade thickness 92mm
– Polyurethane density: 42Kg/m³

Mod S809 AT-C cold storage door is suitable for controlled atmosphere cold room for vegetables and fruits preservation applications where a perfect gas tightness is required with operation temperature not lower than -5°C.
The double gasket system allows the application on cold room not constantly used in controlled atmosphere.

– Door surface made from German stainless steel sheets 304 or inox with circular design.
– Outside handle: lever inox 304.
– Inside handle: lever inox 304.
– Double density EPDM gasket on 3 sides.
– Low gasket in PVC.
– Inflatable gasket to be used during the period of ripening.
– Pressure gauge and inflating valve.
– Ispection window (600x800mm clear opening) provided with external lock and internal sofety opener and magnetic sealing gasket.
– Stainless steel angle – shaped frame, reinforced from the inside with heavy duty, robust PVC, with modern German design and high mechanical strength.
– Special threshold S/2 with the frame (2 jambs + 1 transom) partially put (60 mm) into the floor. At the bottom of the frame it’s fixed an “C” profile made of iron which is recessed into the floor. Only the upper part will result visible at the end of the work.
– Slide mechanism cover made from inox 304 stainless steel profile. It ensures perfect adhension at the gaskets, without extra components on the floor.
– Stainless steel 304 slide mechanism and side mechanism of modern design, exceptional sliding properties.
– Ramps, or falling bends, that ensure a perfect contact between the door and the frame they provide the best insulation between the inside and the outside of the cold room. They are assembled on the closing side of the door.
– Clamp: thanks to its sloping level it assures the perfect closing of the couple door / frame.
– Plastic pulleys, by means of with the door slides along the sliding system; they are adjustable in height & in depth.
– Adjustable lower register, by means of with the door slides along the lower guide.
– Lower closing hook: it’s made of INOX304 and assembled on the closing side of the frame and during the closing it assures the hermetic contact between the door and the frame.
– Striker of the lower closing hook: it’s made of plastic and assembled on the blade, on the handle side. During the closing of the door it goes into the lower hook and assures the hermetic contact between the door and the frame.

OPTION:
PLCE automation device
Safety valve for inflatable system
External system provided with padlock closing system

Stainless steel fire doors offer the safest solution to the cold room doors, providing protection from the fire for more than 60 minutes. They are constructed with high technology fireproof materials and they bear CE EN 1634-1 certification, in order to ensure fire safety.

– Door leaf thickness 120mm providing insulation for low temperature freezer and positive temperature chiller doors.
– Door surface made from German stainless steel sheets 304 or inox with circular design.
– Inside the door high tech materials are combined with non flammable polyurethane according to DIN 4102-1.
– Non – flammable materials providing fire endurance up to 60min (door endured fire test for 78min).
– For thermal insulation, perimetrical on the door leaf special insulating gaskets are used. At the bottom of the door sweep gasket is used.
– Heating elements are used inside the frame and inside the threshold in chiller and freezer door.
– Stainless steel 304 frame insulated with high-tech materials, (sheet metal thickness 1,5mm).
– Heavy duty hinges (set of three pieces) used with self- closing mechanism.
– Fire rated exit door handle with or without key lock hole.
– Heavy duty fire tested door closer.
– Fire rated Panic Bar is mounted on the push side of the door with Steel latches.

Stainless steel fire doors offer the safest solution to the cold room doors, providing protection from the fire for more than 60 minutes. They are constructed with high technology fireproof materials and they bear CE EN 1634-1 certification, in order to ensure fire safety.

– Door leaf thickness 120mm providing insulation for low temperature freezer and positive temperature chiller doors.
– Door surface made from German stainless steel sheets 304 or inox with circular design.
– Non – flammable materials providing fire endurance up to 60min.
– Inside the door high tech materials are combined with non flammable polyurethane according to DIN 4102-1.
– Heating elements are used inside the frame and inside the threshold in freezer door.
– Insulated frame with high-tech materials made of Stainless steel 304 (sheet metal thickness 1,5mm).
– Stainless steel 304 sheet metal sliding guide fabrication (sheet metal thickness 2mm).
– Electronic accessories current at 12-24V.
– In case of fire, the door is automatically closed by autoclose mechanism, fire tested for use on fire protection sliding doors. Damper is used to ensure extra safety.
– Stainless steel heavy duty external and internal handle.
– Stainless steel wheels and brackets.
– Stainless steel sliding rail.

The double leaf stainless steel hinged cold storage doors AMP are being constructed in our industry at Kryoneri Attica by our trained personnel using German raw materials and the German expertise. The stainless steel double leaf hinged doors are divided in several models MOD S608TP2 – S609TL2 – S612TXL2 – S612TXXL2 (depending on the temperature required). These doors are used for large openings. They are necessary for every cold room, they are perfectly adjustable, they have hermetically sealing and they keep the temperature in the preferable level. They are available for chillers and freezers and they can be constructed in all dimensions.

MOD S608TP2 up to 0° C
MOD S609TL2 up to -25° C
MOD S612TXL2 up to -30° C
MOD S612TXXL2 up to -40° C

Additional Information:
– Stainless steel angle – shaped frame, reinforced from the inside with heavy duty, robust PVC, with modern German design and high mechanical strength.
– Standard door leaf with Polyurethane insulation supplied from BAYER of density 42 kg/m³. Door surface made from German stainless steel sheets 304 or inox with circular design.
– Single section door, maximum dimension up to 1500 x 2500 mm. It locks in three points with 6 hinges.
– Lock mechanism & hinges for all hinged doors.
– Border gaskets, insulating properties with beehive cells and perfect adhesion.
– Five year written guarantee. Certified with ISO 9001: 2015 & CE 89/106 ÅÍ13241-1.

The stainless steel hinged cold storage doors AMP are being constructed in our industry at Kryoneri Attica by our trained personnel using German raw materials and the German expertise. The stainless steel hinged doors are divided in several models MOD S608TP – S609TL – S612TXL – S612TXXL (depending on the temperature required). They are necessary for every cold room, they are perfectly adjustable, they have hermetically sealing and they keep the temperature in the preferable level. They are available for chillers and freezers and they can be constructed in all dimensions.

MOD S608TP up to 0° C
MOD S609TL up to -25° C
MOD S612TXL up to -30° C
MOD S612TXXL up to -40° C

Additional Information:
– Stainless steel angle – shaped frame, reinforced from the inside with heavy duty, robust PVC, with modern German design and high mechanical strength.
– Standard door leaf with Polyurethane insulation supplied from BAYER of density 42 kg/m³. Door surface made from German stainless steel sheets 304 or inox with circular design.
– Single section door, maximum dimension up to 1500 x 2500 mm. It locks in three points with 6 hinges.
– Lock mechanism & hinges for all hinged doors.
– Border gaskets, insulating properties with beehive cells and perfect adhesion.
– Five year written guarantee. Certified with ISO 9001: 2015 & CE 89/106 ÅÍ13241-1.

AMP Industry exclusively produces stainless steel double leaf sliding cold storage doors MOD S808TP2 – S809TP2 – S809TL2 – S812TXL2 – S812TXXL2. The sliding doors can be used when the opening is bigger than 1,20m, when pallet trucks – clarks enter the cold room and in cases that the personnel has to open the doors very often. They are perfect for industries large cargo and in facilities where the continuous opening the door is required. The specifications and the manufacturing method applied make them ideal for food industries such as fruit packaging units, meat industries, dairies, logistics and more. The stainless steel double leaf sliding cold storage doors by amp are divided in categories depending on the temperature required. They can be installed in both chiller and freezer rooms.

MOD S808TP2 up to 0° C
MOD S809TP2 up to -2° C
MOD S809TL2 up to -25° C
MOD S812TXL2 up to -30° C
MOD S812TXXL2 up to -40° C

Additional Information:
– Stainless steel angle – shaped frame, reinforced from the inside with heavy duty, robust PVC, with modern German design and high mechanical strength.
– Standard door leaf with Polyurethane insulation supplied from BAYER of density 42 kg/m³. Door surface made from German stainless steel sheets 304 or inox with circular design.
– Slide mechanism of modern design, exceptional sliding properties. Very soft closing and easy disengagement. Slide mechanism cover made from Stainless steel 304 or inox with circular design.
– Standard stainless steel 304 side panel, adapted to panels. It ensures perfect adhension at the gaskets, without extra components on the floor.
– External shutter Inox 304 of modern design, extra heavy duty lever.
– Border gaskets, insulating properties with Beehive cells and perfect adhesion, and with door heating element installed for the defrosting.

Five (5) year guarantee is included in the prices.

AMP Industry exclusively produces stainless steel sliding cold storage doors MOD S808TP – S809TP – S809TL – S812TXL – S812TXXL. The sliding doors can be used when the opening is bigger than 1,20m, when pallet trucks – clarks enter the cold room and in cases that the personnel has to open the doors very often. They are perfect for industries large cargo and in facilities where the continuous opening the door is required. The specifications and the manufacturing method applied make them ideal for food industries such as fruit packaging units, meat industries, dairies, logistics and more. The stainless steel sliding cold storage doors by amp are divided in categories depending on the temperature required. They can be installed in both chiller and freezer rooms.

MOD S808TP up to 0° C
MOD S809TP up to -2° C
MOD S809TL up to -25° C
MOD S812TXL up to -30° C
MOD S812TXXL up to -40° C

Additional Information:
– Stainless steel angle – shaped frame, reinforced from the inside with heavy duty, robust PVC, with modern German design and high mechanical strength.
– Standard door leaf with Polyurethane insulation supplied from BAYER of density 42 kg/m³. Door surface made from German stainless steel sheets 304 or inox with circular design.
– Slide mechanism of modern design, exceptional sliding properties. Very soft closing and easy disengagement. Slide mechanism cover made from Stainless steel 304 or inox with circular design.
– Standard stainless steel 304 side panel, adapted to panels. It ensures perfect adhension at the gaskets, without extra components on the floor.
– External shutter Inox 304 of modern design, extra heavy duty lever.
– Border gaskets, insulating properties with Beehive cells and perfect adhesion, and with door heating element installed for the defrosting.

Five (5) year guarantee is included in the prices.

Applications: pharmaceutical industry, hospitals, clinics, clean rooms, surgeries, food preparation workshops.

– Stainless steel handle mechanism in U-shape.
– Lock & hinges.
– Modern design and construction for soft, easy and noiseless closing without problems.
– Single section (monoblock) door.
– Polyurethane insulation thickness of 40 mm from BAYER Germany.
– Stainless steel frame reinforced with German polyethylene by Roechling.
– Door surface inox stainless steel 304 or with circular design.
– Border gaskets of german origin, insulating properties with Beehive cells and perfect adhesion.
– Certified with Certificate of EU Food Contact Compliance 2002/72/EC.

Special rubber gasket for clean room doors
In order to meet the specifications for clean room doors, for areas for the manufacturing of drugs, surgeries, hospitals the gap between the door and the floor should be sealed, preventing the transportation of air, smoke, dust and sound.
It includes an aluminum profile guide, EPDM rubber (resistant to temperatures from – 35° to + 90°) and supporting materials well reinforced to withstand more than 200,000 door openings-closings.
The mechanism works with a switch which regulates the movement of the profile with the rubber, thus adapting to the floor every time you open and close the door.

Stainless steel flip – flap doors MOD SFFPU2 of double leaf with BAYER Germany polyurethane insulation, free of chlorofluorocarbons (CFC & HCFC FREE), with sound insulation and thermal insulation properties.

The thickness of the door is 40mm, and the door surface is made from German steel sheets Stainless steel 304 or inox with circular design.

A special insulating EPDM rubber with excellent grip is placed on the outer perimeter of the door. Another special rubber is placed at the middle of the two leaves that allows the correct opearation of the door, adhesion between the leaves and offers finger protection.

It is adapted to the panel with a stainless steel angle – shaped frame, reinforced from the inside with heavy duty, robust PVC, with modern German design and high mechanical strength, embracing solidly the panel on which the leaves of the door are mounted. They open inside-out and close immediately “after passing”, blocking the passage of insects, dust, odors & other and they remain open to 90 degrees angle.

Each door has fixed oval porthole mounted and has special protection ails (bumpers) from polyethylene, under the porthole, inside – out. This material is extremely resistant to impact and to grease and acids and is of modern design and aesthetics.

Applications: pharmaceutical industry, hospitals, clinics, clean rooms, surgeries, food preparation workshops.

– Stainless steel handle mechanism in U-shape.
– Lock & hinges.
– Modern design and construction for soft, easy and noiseless closing without problems.
– Single section (monoblock) door.
– Polyurethane insulation thickness of 40 mm from BAYER Germany.
– Stainless steel frame reinforced with German polyethylene by Roechling.
– Door surface inox stainless steel 304 or with circular design.
– Border gaskets of german origin, insulating properties with Beehive cells and perfect adhesion.
– Certified with Certificate of EU Food Contact Compliance 2002/72/EC.

Special rubber gasket for clean room doors
In order to meet the specifications for clean room doors, for areas for the manufacturing of drugs, surgeries, hospitals the gap between the door and the floor should be sealed, preventing the transportation of air, smoke, dust and sound.
It includes an aluminum profile guide, EPDM rubber (resistant to temperatures from – 35° to + 90°) and supporting materials well reinforced to withstand more than 200,000 door openings-closings.
The mechanism works with a switch which regulates the movement of the profile with the rubber, thus adapting to the floor every time you open and close the door.

Stainless steel flip – flap doors MOD SFFPU with BAYER Germany polyurethane insulation, free of chlorofluorocarbons (CFC & HCFC FREE), with sound insulation and thermal insulation properties.

The thickness of the door is 40mm, and the door surface is made from German steel sheets Stainless steel 304 or inox with circular design.

A special insulating EPDM rubber with excellent grip is placed on the outer perimeter of the door. Another special rubber is placed at the middle of the two leaves that allows the correct opearation of the door, adhesion between the leaves and offers finger protection.

It is adapted to the panel with a stainless steel angle – shaped frame, reinforced from the inside with heavy duty, robust PVC, with modern German design and high mechanical strength, embracing solidly the panel on which the leaves of the door are mounted. They open inside-out and close immediately “after passing”, blocking the passage of insects, dust, odors & other and they remain open to 90 degrees angle.

Each door has fixed oval porthole mounted and has special protection ails (bumpers) from polyethylene, under the porthole, inside – out. This material is extremely resistant to impact and to grease and acids and is of modern design and aesthetics.

PVC curtains MOD CRTN are used for partitions on Industry, food storage, food preparation workshops, pallet trucks – forklifts entrances, refrigeration doors. They help to protect your space from dust, insects, odors, the difference of temperatures.
With every pvc curtain we give you the necessary certification of material that is required.

• Transparent P.V.C. strip curtains very soft and resistant, especially for low temperatures.
• Easy installation in 3´.
• Big saving of electrical energy up to 95%, with the opening of the cold room door.
• Refrigeration machine without damages.
• Special reinforced suspension base from ABS with hooks.
• Overlap of each strip 45 mm.
• Three different widths-thicknesses:
a. 200 mm x 2 mm
b. 300 mm x 3 mm
c. 400 mm x 4 mm.
• Smooth surface or with ribbed stripes on both sides for bigger heights.
• They do not contain harmful plasticizers DOHP/DEHP FREE.
• Available also in insect repellent version.
• Every strip curtain exceeds the door opening by 10 cm in width and 8 cm in height.

AMP industry exclusively provides the PVC strip curtain system for trucks. Installing PVC curtains inside the truck, can be very useful for the owner due to the fact that it assists in order to achieve the maximum freezing and save energy and money.

The curtain mounting system can whether be stable or sliding, depending on the requirements. More specific, we can choose the sliding system when we want better access and faster loading and unloading during the product delivery, when the truck is loaded with cargo. If the truck has two air-coolers then we can divide the space with a transparent curtain inside the truck. Furthermore, there is the option to use hand break to move back and forward the curtain system in the main truck and lock automatically in any point of the trolley.

The most significant advantage of using the sliding guides is that the truck owner can choose to refrigerate only the part of the bus that he wants to be refrigerated, saving therefore energy and most important, money. The key of this technique is that every time a part of the cargo is unloaded, the space that has to be refrigerated is decreasing. Consequently, the efficiency is increasing, energy is saving and the operating costs are decreasing.

We are always at your disposal for more technical details or inquiries.

Amp industry offers metal cold room shelves which serve excellently for product storage (cheese, meat, fruits, medicine, liquids and more).
They bear from small to large cargos (up to 400kg per surface).

• The surfaces are adjusted to the desirable height per inch (2,54 cm).
• They allow uniform refrigeration of the merchandise even from the lower side, which osculates to it.
• They are easy to be installed – without tools.
• Big variety of dimensions in order take full advantage of the space in terms of length and height and categorisation of the merchandise.
• Heavy-duty construction with high stability.
• They do not sway and are self-standing.
• Ready for delivery in thicknesses of 46 cm and 61 cm and height of 1,83 m and can be placed in combinations of 46 cm and 61 cm according to your needs.
• High quality on a low price.
• They meet all standards of hygiene and food safety of the World Health Organization NSF & VSi, being antitoxic, suitable for food storage.
• Unlimited durability over time being stainless steel INOX 304.

How to install shelves
1) We buckle in every column the black clasp in the preferable height, in all columns, starting from the lowest surface.
2) In every corner of the surface, we put the column through the circular socket until it fits. We repeat the procedure for every surface in the preferable height.
To create a corner with the existing shelf:
• We fasten this time into 2 columns the black plastic clasp at the same height that we fastened before in the same shelf
• We put the circular sockets of the narrow side of the surface, in both column until they fit tightly.
• In the place that we want to create the corner, we put the hooks in the existing shelf and we place the first on it.
• Lower surface than the second shelf.
• We follow the same process for the rest of the surfaces.

Cold room shelves MOD SHLV are used to exploit the space of the rooms.
Shelves are offered being suitable especially for the liquid environment or cold rooms, kitchens and warehouses, and they are our exclusive import.

•They bear from small to large cargos (up to 400kg per surface).
•The surfaces are adjusted to the desirable height per inch (2,54 cm).
•They allow uniform refrigeration of the merchandise even from the lower side, which osculates to it.
•They are easy to be installed without tools.
•Big variety of dimensions in order take full advantage of the space in terms of length and height and categorisation of the merchandise.
•Heavy-duty construction with high stability.
•They do not sway and are self-standing.
•Ready for delivery in thicknesses of 46 cm and 61 cm and height of 1,83 m. They can be placed in width combinations of 46 cm and 61 cm according to your needs.
•High quality on a low price.
•They meet all standards of hygiene and food safety of the World Health Organization NSF & BSi, being antitoxic, suitable for food storage.
•Available in versions:
a) Standard version
b) INOX 304

How to install shelves
1) We buckle in every column the black clasp in the preferable height, in all columns, starting from the lowest surface.
2) In every corner of the surface, we put the column through the circular socket until it fits. We repeat the procedure for every surface in the preferable height.
To create a corner with the existing shelf:
• We fasten this time into 2 columns the black plastic clasp at the same height that we fastened before in the same shelf
• We put the circular sockets of the narrow side of the surface, in both column until they fit tightly.
• In the place that we want to create the corner, we put the hooks in the existing shelf and we place the first on it.
• Lower surface than the second shelf.
• We follow the same process for the rest of the surfaces.

REQUEST A QUOTE