Frigo Doors

Our amp doors are assembled in our factory with modern industrial equipment, since 1963, with German materials, accessories and mechanisms that we exclusively import and they close hermetically. Their polyurethane (PU) insulation comes from the house of BAYER Germany, with triple insulating ability in contrast to the other insulating materials. We offer flexible special orders, superior quality, fast deliveries.

Cold storage doors keep the temperature in the required degrees, in both chiller and freezer rooms. Special doors (flip flap, service, clean room) are used in partitions between booths, laboratories or changing rooms to ensure easy access, excellent insulation and protection against bacteria (clean room). Fast roll doors are used for separating areas and departments, commercial and industrial buildings with wind resistance Class 3.

Every door has its own safety shutter, which differs according to the door type, combining safety and excellent refrigeration of products. All amp doors are in accordance with requirements of CE 89/106 ΕΝ 13241-1. A five year guarantee is included in the price while our personnel will always be at your service for any further support. All our doors can be adjusted to your preferable dimensions.

The hinged cold storage doors AMP are being constructed in our industry at Kryoneri Attica by our trained personnel using German raw materials and the German expertise. The hinged doors are divided in several models MOD 608TP – 609TL – 612TXL – 612TXXL (depending on the temperature required). They are necessary for every cold room, they are perfectly adjustable, they have hermetically sealing and they keep the temperature in the preferable level. They are available for chillers and freezers and they can be constructed in all dimensions.

MOD 608TP up to 0° C
MOD 609TL up to -25° C
MOD 612TXL up to -30° C
MOD 612TXXL up to -40° C

Additional Information:
– Angle – shaped frame, made from heavy duty, robust and reinforced with marine plywood, PVC, with modern German design and high mechanical strength. In accordance with HACCP standards. EASY-PASS (quick & easy assembly).
– Standard door leaf with Polyurethane insulation supplied from BAYER of density 42 kg/m³. Door surface made from German steel sheets 30% thicker than the competition, plasticized to a thickness of 200 ìm with Sanitary Steel film coating with antibacterial properties.
– Single section door. It locks in three points with 6 hinges.
– Lock mechanism & hinges for all hinged doors.
– Border gaskets, insulating properties with beehive cells and perfect adhesion.
– Wide colour range.
– Five year written guarantee. Certified with ISO 9001: 2015 & CE 89/106 ÅÍ13241-1.

The double leaf hinged cold storage doors AMP are being constructed in our industry at Kryoneri Attica by our trained personnel using German raw materials and the German expertise. The double leaf hinged doors are divided in several models MOD 608TP2 – 609TL2 – 612TXL2 – 612TXXL2 (depending on the temperature required). These doors are used for large openings. They are necessary for every cold room, they are perfectly adjustable, they have hermetically sealing and they keep the temperature in the preferable level. They are available for chillers and freezers and they can be constructed in all dimensions.

MOD 608TP2 up to 0° C
MOD 609TL2 up to -25° C
MOD 612TXL2 up to -30° C
MOD 612TXXL2 up to -40° C

Additional Information:
– Angle – shaped frame, made from heavy duty, robust and reinforced with marine plywood, PVC, with modern German design and high mechanical strength. In accordance with HACCP standards. EASY-PASS (quick & easy assembly).
– Standard door leaf with Polyurethane insulation supplied from BAYER of density 42 kg/m³. Door surface made from German steel sheets 30% thicker than the competition, plasticized to a thickness of 200 ìm with Sanitary Steel film coating with antibacterial properties.
– Single section door. It locks in three points with 6 hinges.
– Lock mechanism & hinges for all hinged doors.
– Border gaskets, insulating properties with beehive cells and perfect adhesion.
– Wide colour range.
– Five year written guarantee. Certified with ISO 9001: 2015 & CE 89/106 ÅÍ13241-1.

AMP Industry exclusively produces leaf sliding cold storage doors MOD 808TP – 809TP – 809TL – 812TXL – 812TXXL. The sliding doors can be used when the opening is bigger than 1,20m, when pallet trucks – clarks enter the cold room and in cases that the personnel has to open the doors very often. They are perfect for industries large cargo and in facilities where the continuous opening the door is required. The specifications and the manufacturing method applied make them ideal for food industries such as fruit packaging units, meat industries, dairies, logistics and more. The sliding cold storage doors by amp are divided in categories depending on the temperature required. They can be installed in both chiller and freezer rooms.

MOD 808TP up to 0° C
MOD 809TP up to -2° C
MOD 809TL up to -25° C
MOD 812TXL up to -30° C
MOD 812TXXL up to -40° C

Additional Information:
– Angle – shaped frame, made from heavy duty, robust and reinforced with PVC, with modern German design and high mechanical strength. In accordance with HACCP standards. EASY-PASS (quick & easy assembly).
– Standard door leaf with Polyurethane insulation supplied from BAYER (Germany) of density 42 kg/m³, with injection at heated press of 500 tonnes. Door surface made from German steel sheets 30% thicker than the competition, plasticized to a thickness of 200 ìm with Sanitary Steel film coating with antibacterial properties.
– Slide mechanism of modern design, exceptional sliding properties. Very soft closing and easy disengagement. Slide mechanism cover made from round, curved aluminium profile.
– Standard aluminum side panel, anodized, adapted to panels. It ensures perfect adhension at the gaskets, without extra components on the floor.
– External shutter Inox 304 of modern design, extra heavy duty lever.
– Border gaskets, insulating properties with Beehive cells and perfect adhesion, and with door heating element installed for the defrosting.

Five (5) year guarantee is included in the prices.

AMP Industry exclusively produces double leaf sliding cold storage doors MOD 808TP2 – 809TP2 – 809TL2 – 812TXL2 – 812TXXL2. The sliding doors can be used when the opening is bigger than 1,20m, when pallet trucks – clarks enter the cold room and in cases that the personnel has to open the doors very often. They are perfect for industries large cargo and in facilities where the continuous opening the door is required. The specifications and the manufacturing method applied make them ideal for food industries such as fruit packaging units, meat industries, dairies, logistics and more. The double leaf sliding cold storage doors by amp are divided in categories depending on the temperature required. They can be installed in both chiller and freezer rooms.

MOD 808TP2 up to 0° C
MOD 809TP2 up to -2° C
MOD 809TL2 up to -25° C
MOD 812TXL2 up to -30° C
MOD 812TXXL2 up to -40° C

Additional Information:
– Angle – shaped frame, made from heavy duty, robust and reinforced with PVC, with modern German design and high mechanical strength. In accordance with HACCP standards. EASY-PASS (quick & easy assembly).
– Standard door leaf with Polyurethane insulation supplied from BAYER (Germany) of density 42 kg/m³, with injection at heated press of 500 tonnes. Door surface made from German steel sheets 30% thicker than the competition, plasticized to a thickness of 200 ìm with Sanitary Steel film coating with antibacterial properties.
– Slide mechanism of modern design, exceptional sliding properties. Very soft closing and easy disengagement. Slide mechanism cover made from round, curved aluminium profile.
– Standard aluminum side panel, anodized, adapted to panels. It ensures perfect adhension at the gaskets, without extra components on the floor.
– External shutter Inox 304 of modern design, extra heavy duty lever.
– Border gaskets, insulating properties with Beehive cells and perfect adhesion, and with door heating element installed for the defrosting.

Five (5) year guarantee is included in the prices.

The electric sliding chiller & freezer cold storage doors are manufactured at our facilities, utilizing the German know-how that we have acquired collaborating with the biggest German raw materials manufacturers of the sector. Our experience in combination with the excellent quality german raw materials & state-of-art latest technology equipment & handmancraft allow us to manufacture doors of high endurance & thermal insulated according to the European HACCP regulations and with the necessary CE certifications.

MOD 808TP-E up to 0° C
MOD 809TP-E up to -2° C
MOD 809TL-E up to -25° C
MOD 812TXL-E up to -30° C
MOD 812TXXL-E up to -40° C

A. Automatic activation of sliding door via a mechanism with a motor connected to a multifunction panel. Switchgear IP 56 is suitable for installation in a moist environment and includes an electronic circuit for controlling the functions and an inverter to control the paths during operation of the opening-closing and the necessary needs in electrical power in respect to the security settings.

B. All automation system is pre-cabled therefore the connection of the board becomes easy through a multipolar connector which is located at the bottom of the board. There are already pre-installed factory settings which are easily changed depending on the needs of each user.

C. Speed is set to 0,27 m/sec (as per regulations) and the engine has a reversible reducer. The speed can change easily from the board.

D. The primary safety device for crash protection is a sensitive bar resistant type, located on the vertical edge of the door panel, which in case of impact with an obstacle, automatically stops the door and reverses motion.

E. The controls of the STOP (end of movement) during the opening and closing is activated by a micro switch. The transmission is through a chain with adjustable power and not with tapes for cost reasons with breakage problems.

F. A yellow light is flashing signals that the door is in motion. Besides the many arrangements for opening – closing the door from the board, two cords connected to switches are placed in front and behind the door (at desired distances) to facilitate the operator of the forklift at the entrance and exit of the cold room.

G. In case of power failure the door is operated manually.

Based on the specialized quality control department, we offer PVC frame-counter frame (CPR system) & a wide range of color selection at plastisol sanisteel colours (foodsafe steel sheets). The automated sliding cold storage doors are being manufactured by industrial refrigeration manufacturer AMP at its own facilities (16.000 m²) in Kryoneri Attica Greece.

Amp industry, manufactures exclusively the Controlled Atmosphere Doors, a type of cold storage door which serves excellently in order to keep the temperature inside the Cold Room stable. Mod 809 AT-C is suitable Sliding door for cold room with controlled atmosphere in use up to -5°C minimum.
– For temperature up to -5°C
– Blade thickness 92mm
– Polyurethane density: 42Kg/m³

Mod 809 AT-C Cold storage door is suitable for controlled atmosphere cold room for vegetables and fruits preservation applications where a perfect gas tightness is required with operation temperature not lower than -5°C.
The double gasket system allows the application on cold room not constantly used in controlled atmosphere.

Door Leaf
– Leaf perimeter in anodized aluminium (thickness 92 mm).
– Leaf covered with plastisol steel sheet 200ìm that is food-safe, thickness 6/10 mm.
– Outside handle: lever inox 304.
– Inside handle:lever inox 304.
– Double density EPDM gasket on 3 sides.
– Low gasket in PVC.
– Inflatable gasket to be used during the period of ripening.
– Pressure gauge and inflating valve.
– Ispection window (600x800mm clear opening) provided with external lock and internal sofety opener and magnetic sealing gasket.

Frame and counter frame PVC
– Frame and side-frame in PVC ; the frame is thermo-welded (45°).
– Counter-frame in PVC, colour RAL 9010, thermo-welded (45°).
– Special threshold S/2 with the frame (2 jambs + 1 transom) partially put (60 mm) into the floor. At the bottom of the frame it’s fixed an “C” profile made of iron which is recessed into the floor. Only the upper part will result visible at the end of the work.

Sliding system
– The sliding system is made of:
1. Sliding profile in anodized aluminium, with safety mechanism.
2. Ramps, or falling bends, that ensure a perfect contact between the door and the frame they provide the best insulation between the inside and the outside of the cold room. They are assembled on the closing side of the door.
3. Cover (option), made in extruded anodized aluminium it can be simply opened thanks to the hinges assembled on its top, to realize inspection or cleaning services.
– The lower guide is made of:
1. Aluminium profile: assures the perfect straight sliding of the blade during the opening and the closing.
2. Clamp: thanks to its sloping level it assures the perfet closing of the couple door/frame.
3. Closing cap for the aluminium profile: it avoids the accumulation of microbes.

Door Leaf/frame system
– Plastic pulleys, by means of with the door slides along the sliding system; they are adjustable in height & in depth.
– Adjustable lower register, by means of with the door slides along the lower guide.
– Lower closing hook: it’s made of INOX304 and assembled on the closing side of the frame and during the closing it assures the hermetic contact between the door and the frame.
– Striker of the lower closing hook: it’s made of plastic and assembled on the blade, on the handle side. During the closing of the door it goes into the lower hook and assures the hermetic contact between the door and the frame.

OPTION:
PLCE automation device
Safety valve for inflatable system
External system provided with padlock closing system

Fire doors offer the safest solution to the cold storage doors, providing protection from the fire for more than 60 minutes. They are constructed with high technology fireproof materials and they bear CE EN 1634-1 certification, in order to ensure fire safety.

– Door leaf thickness 120mm providing insulation for low temperature freezer and positive temperature chiller doors.
– Galvanized sheet is used with external foodsafe antibacterial plastisol coating (250ìm).
– Inside the door high tech materials are combined with non flammable polyurethane according to DIN 4102-1.
– Non – flammable materials providing fire endurance up to 60min (door endured fire test for 78min).
– For thermal insulation, perimetrical on the door leaf special insulating gaskets are used. At the bottom of the door sweep gasket is used.
– Heating elements are used inside the frame and inside the threshold in chiller and freezer door.
– Stainless steel 304 frame insulated with high-tech materials, (sheet metal thickness 1,5mm).
– Heavy duty hinges (set of three pieces) used with self- closing mechanism.
– Fire rated exit door handle with or without key lock hole.
– Heavy duty fire tested door closer.
– Fire rated Panic Bar is mounted on the push side of the door with Steel latches.

Fire doors offer the safest solution to the cold storage doors, providing protection from the fire for more than 60 minutes. They are constructed with high technology fireproof materials and they bear CE EN 1634-1 certification, in order to ensure fire safety.

– Door leaf thickness 120mm providing insulation for low temperature freezer and positive temperature chiller doors.
– Galvanized sheet is used with external foodsafe antibacterial plastisol coating (250ìm).
– Non – flammable materials providing fire endurance up to 60min.
– Inside the door high tech materials are combined with non flammable polyurethane according to DIN 4102-1.
– Heating elements are used inside the frame and inside the threshold in freezer door.
– Insulated frame with high-tech materials made of Stainless steel 304 (sheet metal thickness 1,5mm).
– Stainless steel 304 sheet metal sliding guide fabrication (sheet metal thickness 2mm).
– Electronic accessories current at 12-24V.
– In case of fire, the door is automatically closed by autoclose mechanism, fire tested for use on fire protection sliding doors. Damper is used to ensure extra safety.
– Stainless steel heavy duty external and internal handle.
– Stainless steel wheels and brackets.
– Stainless steel sliding rail.

Fire doors offer the safest solution to the cold storage doors, providing protection from the fire for more than 60 minutes. They are constructed with high technology fireproof materials and they bear CE EN 1634-1 certification, in order to ensure fire safety.

– Door leaf thickness 120mm providing insulation for low temperature freezer and positive temperature chiller doors.
– Galvanized sheet is used with external foodsafe antibacterial plastisol coating (250ìm).
– Non – flammable materials providing fire endurance up to 60min.
– Inside the door high tech materials are combined with non flammable polyurethane according to DIN 4102-1.
– Heating elements are used inside the frame and inside the threshold in freezer door.
– Insulated frame with high-tech materials made of Stainless steel 304 (sheet metal thickness 1,5mm).
– Stainless steel 304 sheet metal sliding guide fabrication (sheet metal thickness 2mm).
– Electronic accessories current at 12-24V.
– In case of fire, (when no power failure occurs) the control panel, which is connected to the main fire protection system, closes the door.
– In case of fire and power failure, the motor clutch is disengaged so the door can easily moved by hand and the door is automatically closed by autoclose mechanism, fire tested for use on fire protection sliding doors. Damper is used to ensure extra safety.
– Stainless steel heavy duty external and internal handle.
– Stainless steel wheels and brackets.
– Stainless steel sliding rail.
– Door is operated manually or automatically through chain motor tested according to CE EN 13241-1.
– Optional hold-open system.

Automatic Fire Door with certified Control Panel Input 230Vm, 50Hz, (L+N). Details:
– Waterproof control panel IP65
– Safety edge
– Photo electric cells
– Open/Close Buttons on Both Door sides
– Emergency stop switch
– Remote control
– Opening/closing time adjusted 6-600sec
– Lighting bulb for operation

Double leaf Flip- flap AMP door. AMP Flip – Flap (dual action) doors can be dual or single sectional.

– German – supplied polyethylene sheets – panels of 15mm thickness with fixed oval fanlight, reinforced by antishock bars to resist impact from trolleys, pallet lifts and fork lift trucks. Available in several colours. That material is extremely resistant to fats, acids and cleaning substances. The door achieves an operational design, long lifetime without any maintenance costs.
– Transparent PVC panels, German – supplied, semi – rigid. They are reinforced by inner polyester mesh, in high – strength horizontal and vertical layout.
– All doors are suitable for laboratories, warehouses and indoor areas. They are paramount for cool boxes fitted with sliding doors. They shall be fitted with special mechanisms to provide automatic closing after each opening. They remain open when opened at 90°.
– The above doors are supplied at low prices, without compromising high quality.

Moreover, ÁÌÑ doors include the following:
– Options to select color from our swatch, upon demonstration to the client.
– Decorative, impact resistant bars (at your request).

Technical Specifications of the material: According to DIN EN ISO 1043.

Flip – Flap doors MOD FFPU2 of double leaf with BAYER Germany polyurethane insulation, free of chlorofluorocarbons (CFC & HCFC FREE), with sound insulation and thermal insulation properties.

The thickness of the door is 40mm, lined with galvanized German steel sheets coated with plastisol of 200 microns thickness and bearing perimetric aluminum profile (the frame) mounted opposite and pressed together with the polyurethane in order to maintain the door always flat.

A special insulating EPDM rubber with excellent grip is placed on the outer perimeter of the door. Another special rubber is placed at the middle of the two leaves that allows the correct opearation of the door, adhesion between the leaves and offers finger protection.

It is adapted to the panel with a frame from angular PVC and CPR counter frame, embracing solidly the panel on which the leaves of the door are mounted. They open inside-out and close immediately “after passing”, blocking the passage of insects, dust, odors & other and they remain open to 90 degrees angle.

Each door has fixed oval porthole mounted and has special protection ails (bumpers) from polyethylene, under the porthole, inside – out. This material is extremely resistant to impact and to grease and acids and is of modern design and aesthetics.

Single leaf Flip- flap AMP door. AMP Flip – Flap (dual action) doors can be dual or single sectional.

– German – supplied polyethylene sheets – panels of 15mm thickness with fixed oval fanlight, reinforced by antishock bars to resist impact from trolleys, pallet lifts and fork lift trucks. Available in several colours. That material is extremely resistant to fats, acids and cleaning substances. The door achieves an operational design, long lifetime without any maintenance costs.
– Transparent PVC panels, German – supplied, semi – rigid. They are reinforced by inner polyester mesh, in high – strength horizontal and vertical layout.
– All doors are suitable for laboratories, warehouses and indoor areas. They are paramount for cool boxes fitted with sliding doors. They shall be fitted with special mechanisms to provide automatic closing after each opening. They remain open when opened at 90°.
– The above doors are supplied at low prices, without compromising high quality.

Moreover, ÁÌÑ doors include the following:
– Options to select color from our swatch, upon demonstration to the client.
– Decorative, impact resistant bars (at your request).

Technical Specifications of the material: According to DIN EN ISO 1043.

Flip – Flap doors MOD FFPU1 of single leaf, with BAYER Germany polyurethane insulation, free of chlorofluorocarbons (CFC & HCFC FREE), with sound insulation and thermal insulation properties.

The thickness of the door is 40mm, lined with galvanized German steel sheets coated with plastisol of 200 microns thickness and bearing perimetric aluminum profile (the frame) mounted opposite and pressed together with the polyurethane in order to maintain the door always flat.

A special insulating EPDM rubber with excellent grip is placed on the outer perimeter of the door.

It is adapted to the panel with a frame from angular PVC and CPR counter frame, embracing solidly the panel on which the leaves of the door are mounted. They open inside-out and close immediately “after passing”, blocking the passage of insects, dust, odors & other and they remain open to 90 degrees angle.

Each door has fixed oval porthole mounted and has special protection ails (bumpers) from polyethylene, under the porthole, inside – out. This material is extremely resistant to impact and to grease and acids and is of modern design and aesthetics.

– Double leaf service doors with German polyurethane insulation thickness of 40 mm, made from galvanized steel sheets with 200ìm with special plastisol coating, standard lock & – stainless steel U-shape handle.
– Aluminum frame and counter frame system in Ð-shape for panel or wall thicknesses of 60mm up to 140 mm.
– Modern construction & aesthetic, is an advantage of service doors as well as hygienic surfaces with no spaces for dust & microbes to form.
– Amp sound & thermal insulated doors suitable for offices, food preparation areas, locker rooms, WC, laboratories, warehouses, industry etc.
– Possibility of construction of any dimension requested, with or without window with internal protection bar and immediate delivery.

Double leaf service doors are used in areas with a positive temperature (therefore T>0°C), to:
• divide areas for the drugs processing, or areas for the blood processing and freezing in offices
• divide noisy areas (soundproof door) from the ones that must be deafened (for example in hospitals)
• divide cold areas (thermo-insulating door) from the ones used as offices
• divide projecting areas from the one used as offices, for example in the Communication and IT industry
• divide hygienic areas (toilettes, showers) from the dressing room

The service doors are being manufactured and tested before shipment by industrial refrigeration manufacturer AMP at its own facilities (16.000 m²) in Kryoneri Attica Greece.

Applications: pharmaceutical industry, hospitals, clinics, clean rooms, surgeries, food preparation workshops.
Certified antibacterial coating for clean room doors

The clean room doors for sanitary applications carry a special coating film with antibacterial properties.
An antibacterial action is activated on environmental conditions that usually favor the proliferation of bacteria, fungi and algae. This antimicrobial coating has a dual effect, prevents the growth of microbes and fights those that may have been created.
The steel sheets with polyester coating with antibacterial properties, offer long-term protection and hygiene, even in places where cleaning is not guaranteed. The coating of clean room doors offers proven effectiveness against different types of bacteria such as staphylococcus, salmonella, escherichia coli, listeria etc.
They are certified specifically for food with the Certificate of EU Food Contact Compliance 2002/72 / EC.

Special rubber gasket for clean room doors
In order to meet the specifications for clean room doors, for areas for the manufacturing of drugs, surgeries, hospitals the gap between the door and the floor should be sealed, preventing the transportation of air, smoke, dust and sound.
It includes an aluminum profile guide, EPDM rubber (resistant to temperatures from – 35 ° to + 90 °) and supporting materials well reinforced to withstand more than 200,000 door openings-closings.
The mechanism works with a switch which regulates the movement of the profile with the rubber, thus adapting to the floor every time you open and close the door.

– Service doors with German polyurethane insulation thickness of 40 mm, made from galvanized steel sheets with 200ìm with special plastisol coating, standard lock & – stainless steel U-shape handle.
– Aluminum frame and counter frame system in Ð-shape for panel or wall thicknesses of 60mm up to 140 mm.
– Modern construction & aesthetic, is an advantage of service doors as well as hygienic surfaces with no spaces for dust & microbes to form.
– Amp sound & thermal insulated doors suitable for offices, food preparation areas, locker rooms, WC, laboratories, warehouses, industry etc.
– Possibility of construction of any dimension requested, with or without window with internal protection bar and immediate delivery.

Service doors are used in areas with a positive temperature (therefore T>0°C), to:
• divide areas for the drugs processing, or areas for the blood processing and freezing in offices
• divide noisy areas (soundproof door) from the ones that must be deafened (for example in hospitals)
• divide cold areas (thermo-insulating door) from the ones used as offices
• divide projecting areas from the one used as offices, for example in the Communication and IT industry
• divide hygienic areas (toilettes, showers) from the dressing room

The service doors are being manufactured and tested before shipment by industrial refrigeration manufacturer AMP at its own facilities (16.000 m²) in Kryoneri Attica Greece.

Applications: pharmaceutical industry, hospitals, clinics, clean rooms, surgeries, food preparation workshops.
Certified antibacterial coating for clean room doors

The double leaf clean room doors for sanitary applications carry a special coating film with antibacterial properties.
An antibacterial action is activated on environmental conditions that usually favor the proliferation of bacteria, fungi and algae. This antimicrobial coating has a dual effect, prevents the growth of microbes and fights those that may have been created.
The steel sheets with polyester coating with antibacterial properties, offer long-term protection and hygiene, even in places where cleaning is not guaranteed. The coating of clean room doors offers proven effectiveness against different types of bacteria such as staphylococcus, salmonella, escherichia coli, listeria etc.
They are certified specifically for food with the Certificate of EU Food Contact Compliance 2002/72/EC.

Special rubber gasket for clean room doors
In order to meet the specifications for clean room doors, for areas for the manufacturing of drugs, surgeries, hospitals the gap between the door and the floor should be sealed, preventing the transportation of air, smoke, dust and sound.
It includes an aluminum profile guide, EPDM rubber (resistant to temperatures from – 35° to + 90°) and supporting materials well reinforced to withstand more than 200,000 door openings-closings.
The mechanism works with a switch which regulates the movement of the profile with the rubber, thus adapting to the floor every time you open and close the door.

The fast roll doors can offer an ideal solution to separate areas and departments, commercial and industrial buildings with wind resistance Class 3. They are made of metal, with a transverse at the top and aligned winding shaft side bearings. The metal structure is supported by vertical columns and with the beading guides, made from high molecular density polizene, self-lubricating and ideal for the sliding of the hinges.

The German origin polyester fabric coated with PVC, with strong resistance, weight 1300gr / m² and thickness 1,3mm, self-extinguishing Class 2 EN ISO 2060, made to withstand temperatures from +70 °C to – 10 °C. The PVC fabric is available in a variety of colors, including portholes at eye level of the average man, made of transparent crystal material with radiation protection in case a wireless sensor is positioned at the lower end. This new technology absolves us from internal horizontal metal bars.

The movement of the winding axis is via a three-phase motor 380 V – 50 Hz as standard IP 55 CE, with gearmotor and electrical brakes suitable for continuous use, 220 V power supply with inverter with multiple settings (such as the speed of opening and / or closing, the possibility of partial opening, the slowdown at the end of the route in the opening and / or closing, the time setting of automatic closing, etc.).

The settings are made via a handy microcomputer in a few seconds- and not manually and mechanically- with repeated testing, until the desired result.
The maximum opening speed is 2,5 m/sec (adjustable by choice).

The fast-roll doors are automatically repositionable drivers, so in case of a possible accidental collision, the fabric comes out from the side guides and when the winding starts, it reenters the drivers without any outside intervention.

AMP Industry exclusively produces stainless steel sliding cold storage doors MOD S808TP – S809TP – S809TL – S812TXL – S812TXXL. The sliding doors can be used when the opening is bigger than 1,20m, when pallet trucks – clarks enter the cold room and in cases that the personnel has to open the doors very often. They are perfect for industries large cargo and in facilities where the continuous opening the door is required. The specifications and the manufacturing method applied make them ideal for food industries such as fruit packaging units, meat industries, dairies, logistics and more. The stainless steel sliding cold storage doors by amp are divided in categories depending on the temperature required. They can be installed in both chiller and freezer rooms.

MOD S808TP up to 0° C
MOD S809TP up to -2° C
MOD S809TL up to -25° C
MOD S812TXL up to -30° C
MOD S812TXXL up to -40° C

Additional Information:
– Stainless steel angle – shaped frame, reinforced from the inside with heavy duty, robust PVC, with modern German design and high mechanical strength.
– Standard door leaf with Polyurethane insulation supplied from BAYER of density 42 kg/m³. Door surface made from German stainless steel sheets 304 or inox with circular design.
– Slide mechanism of modern design, exceptional sliding properties. Very soft closing and easy disengagement. Slide mechanism cover made from Stainless steel 304 or inox with circular design.
– Standard stainless steel 304 side panel, adapted to panels. It ensures perfect adhension at the gaskets, without extra components on the floor.
– External shutter Inox 304 of modern design, extra heavy duty lever.
– Border gaskets, insulating properties with Beehive cells and perfect adhesion, and with door heating element installed for the defrosting.

Five (5) year guarantee is included in the prices.

Amp industry, manufactures exclusively the stainless steel Controlled Atmosphere Doors, a type of cold storage door which serves excellently in order to keep the temperature inside the Cold Room stable. Mod 809 SAT-C is suitable Sliding door for cold room with controlled atmosphere in use up to -5°C minimum.
– For temperature up to -5°C
– Blade thickness 92mm
– Polyurethane density: 42Kg/m³

Mod S809 AT-C cold storage door is suitable for controlled atmosphere cold room for vegetables and fruits preservation applications where a perfect gas tightness is required with operation temperature not lower than -5°C.
The double gasket system allows the application on cold room not constantly used in controlled atmosphere.

– Door surface made from German stainless steel sheets 304 or inox with circular design.
– Outside handle: lever inox 304.
– Inside handle: lever inox 304.
– Double density EPDM gasket on 3 sides.
– Low gasket in PVC.
– Inflatable gasket to be used during the period of ripening.
– Pressure gauge and inflating valve.
– Ispection window (600x800mm clear opening) provided with external lock and internal sofety opener and magnetic sealing gasket.
– Stainless steel angle – shaped frame, reinforced from the inside with heavy duty, robust PVC, with modern German design and high mechanical strength.
– Special threshold S/2 with the frame (2 jambs + 1 transom) partially put (60 mm) into the floor. At the bottom of the frame it’s fixed an “C” profile made of iron which is recessed into the floor. Only the upper part will result visible at the end of the work.
– Slide mechanism cover made from inox 304 stainless steel profile. It ensures perfect adhension at the gaskets, without extra components on the floor.
– Stainless steel 304 slide mechanism and side mechanism of modern design, exceptional sliding properties.
– Ramps, or falling bends, that ensure a perfect contact between the door and the frame they provide the best insulation between the inside and the outside of the cold room. They are assembled on the closing side of the door.
– Clamp: thanks to its sloping level it assures the perfect closing of the couple door / frame.
– Plastic pulleys, by means of with the door slides along the sliding system; they are adjustable in height & in depth.
– Adjustable lower register, by means of with the door slides along the lower guide.
– Lower closing hook: it’s made of INOX304 and assembled on the closing side of the frame and during the closing it assures the hermetic contact between the door and the frame.
– Striker of the lower closing hook: it’s made of plastic and assembled on the blade, on the handle side. During the closing of the door it goes into the lower hook and assures the hermetic contact between the door and the frame.

OPTION:
PLCE automation device
Safety valve for inflatable system
External system provided with padlock closing system

The stainless steel electric sliding chiller & freezer cold storage doors are manufactured at our facilities, utilizing the German know-how that we have acquired collaborating with the biggest German raw materials manufacturers of the sector. Our experience in combination with the excellent quality german raw materials & state-of-art latest technology equipment & handmancraft allow us to manufacture doors of high endurance & thermal insulated according to the European HACCP regulations and with the necessary CE certifications.

MOD S808TP-E up to 0° C
MOD S809TP-E up to -2° C
MOD S809TL-E up to -25° C
MOD S812TXL-E up to -30° C
MOD S812TXXL-E up to -40° C

A. Automatic activation of sliding door via a mechanism with a motor connected to a multifunction panel. Switchgear IP 56 is suitable for installation in a moist environment and includes an electronic circuit for controlling the functions and an inverter to control the paths during operation of the opening-closing and the necessary needs in electrical power in respect to the security settings.

B. All automation system is pre-cabled therefore the connection of the board becomes easy through a multipolar connector which is located at the bottom of the board. There are already pre-installed factory settings which are easily changed depending on the needs of each user.

C. Speed is set to 0,27 m/sec (as per regulations) and the engine has a reversible reducer. The speed can change easily from the board.

D. The primary safety device for crash protection is a sensitive bar resistant type, located on the vertical edge of the door panel, which in case of impact with an obstacle, automatically stops the door and reverses motion.

E. The controls of the STOP (end of movement) during the opening and closing is activated by a micro switch. The transmission is through a chain with adjustable power and not with tapes for cost reasons with breakage problems.

F. A yellow light is flashing signals that the door is in motion. Besides the many arrangements for opening – closing the door from the board, two cords connected to switches are placed in front and behind the door (at desired distances) to facilitate the operator of the forklift at the entrance and exit of the cold room.

G. In case of power failure the door is operated manually.

The automated sliding cold storage doors are being manufactured by industrial refrigeration manufacturer AMP at its own facilities (16.000 m²) in Kryoneri Attica Greece.

Stainless steel fire doors offer the safest solution to the cold room doors, providing protection from the fire for more than 60 minutes. They are constructed with high technology fireproof materials and they bear CE EN 1634-1 certification, in order to ensure fire safety.

– Door leaf thickness 120mm providing insulation for low temperature freezer and positive temperature chiller doors.
– Door surface made from German stainless steel sheets 304 or inox with circular design.
– Non – flammable materials providing fire endurance up to 60min.
– Inside the door high tech materials are combined with non flammable polyurethane according to DIN 4102-1.
– Heating elements are used inside the frame and inside the threshold in freezer door.
– Insulated frame with high-tech materials made of Stainless steel 304 (sheet metal thickness 1,5mm).
– Stainless steel 304 sheet metal sliding guide fabrication (sheet metal thickness 2mm).
– Electronic accessories current at 12-24V.
– In case of fire, (when no power failure occurs) the control panel, which is connected to the main fire protection system, closes the door.
– In case of fire and power failure, the motor clutch is disengaged so the door can easily moved by hand and the door is automatically closed by autoclose mechanism, fire tested for use on fire protection sliding doors. Damper is used to ensure extra safety.
– Stainless steel heavy duty external and internal handle.
– Stainless steel wheels and brackets.
– Stainless steel sliding rail.
– Door is operated manually or automatically through chain motor tested according to CE EN 13241-1.
– Optional hold-open system.

Automatic Fire Door with certified Control Panel Input 230Vm, 50Hz, (L+N). Details:
– Waterproof control panel IP65
– Safety edge
– Photo electric cells
– Open/Close Buttons on Both Door sides
– Emergency stop switch
– Remote control
– Opening/closing time adjusted 6-600sec
– Lighting bulb for operation

Stainless steel fire doors offer the safest solution to the cold room doors, providing protection from the fire for more than 60 minutes. They are constructed with high technology fireproof materials and they bear CE EN 1634-1 certification, in order to ensure fire safety.

– Door leaf thickness 120mm providing insulation for low temperature freezer and positive temperature chiller doors.
– Door surface made from German stainless steel sheets 304 or inox with circular design.
– Inside the door high tech materials are combined with non flammable polyurethane according to DIN 4102-1.
– Non – flammable materials providing fire endurance up to 60min (door endured fire test for 78min).
– For thermal insulation, perimetrical on the door leaf special insulating gaskets are used. At the bottom of the door sweep gasket is used.
– Heating elements are used inside the frame and inside the threshold in chiller and freezer door.
– Stainless steel 304 frame insulated with high-tech materials, (sheet metal thickness 1,5mm).
– Heavy duty hinges (set of three pieces) used with self- closing mechanism.
– Fire rated exit door handle with or without key lock hole.
– Heavy duty fire tested door closer.
– Fire rated Panic Bar is mounted on the push side of the door with Steel latches.

Stainless steel fire doors offer the safest solution to the cold room doors, providing protection from the fire for more than 60 minutes. They are constructed with high technology fireproof materials and they bear CE EN 1634-1 certification, in order to ensure fire safety.

– Door leaf thickness 120mm providing insulation for low temperature freezer and positive temperature chiller doors.
– Door surface made from German stainless steel sheets 304 or inox with circular design.
– Non – flammable materials providing fire endurance up to 60min.
– Inside the door high tech materials are combined with non flammable polyurethane according to DIN 4102-1.
– Heating elements are used inside the frame and inside the threshold in freezer door.
– Insulated frame with high-tech materials made of Stainless steel 304 (sheet metal thickness 1,5mm).
– Stainless steel 304 sheet metal sliding guide fabrication (sheet metal thickness 2mm).
– Electronic accessories current at 12-24V.
– In case of fire, the door is automatically closed by autoclose mechanism, fire tested for use on fire protection sliding doors. Damper is used to ensure extra safety.
– Stainless steel heavy duty external and internal handle.
– Stainless steel wheels and brackets.
– Stainless steel sliding rail.

The double leaf stainless steel hinged cold storage doors AMP are being constructed in our industry at Kryoneri Attica by our trained personnel using German raw materials and the German expertise. The stainless steel double leaf hinged doors are divided in several models MOD S608TP2 – S609TL2 – S612TXL2 – S612TXXL2 (depending on the temperature required). These doors are used for large openings. They are necessary for every cold room, they are perfectly adjustable, they have hermetically sealing and they keep the temperature in the preferable level. They are available for chillers and freezers and they can be constructed in all dimensions.

MOD S608TP2 up to 0° C
MOD S609TL2 up to -25° C
MOD S612TXL2 up to -30° C
MOD S612TXXL2 up to -40° C

Additional Information:
– Stainless steel angle – shaped frame, reinforced from the inside with heavy duty, robust PVC, with modern German design and high mechanical strength.
– Standard door leaf with Polyurethane insulation supplied from BAYER of density 42 kg/m³. Door surface made from German stainless steel sheets 304 or inox with circular design.
– Single section door, maximum dimension up to 1500 x 2500 mm. It locks in three points with 6 hinges.
– Lock mechanism & hinges for all hinged doors.
– Border gaskets, insulating properties with beehive cells and perfect adhesion.
– Five year written guarantee. Certified with ISO 9001: 2015 & CE 89/106 ÅÍ13241-1.

The stainless steel hinged cold storage doors AMP are being constructed in our industry at Kryoneri Attica by our trained personnel using German raw materials and the German expertise. The stainless steel hinged doors are divided in several models MOD S608TP – S609TL – S612TXL – S612TXXL (depending on the temperature required). They are necessary for every cold room, they are perfectly adjustable, they have hermetically sealing and they keep the temperature in the preferable level. They are available for chillers and freezers and they can be constructed in all dimensions.

MOD S608TP up to 0° C
MOD S609TL up to -25° C
MOD S612TXL up to -30° C
MOD S612TXXL up to -40° C

Additional Information:
– Stainless steel angle – shaped frame, reinforced from the inside with heavy duty, robust PVC, with modern German design and high mechanical strength.
– Standard door leaf with Polyurethane insulation supplied from BAYER of density 42 kg/m³. Door surface made from German stainless steel sheets 304 or inox with circular design.
– Single section door, maximum dimension up to 1500 x 2500 mm. It locks in three points with 6 hinges.
– Lock mechanism & hinges for all hinged doors.
– Border gaskets, insulating properties with beehive cells and perfect adhesion.
– Five year written guarantee. Certified with ISO 9001: 2015 & CE 89/106 ÅÍ13241-1.

AMP Industry exclusively produces stainless steel double leaf sliding cold storage doors MOD S808TP2 – S809TP2 – S809TL2 – S812TXL2 – S812TXXL2. The sliding doors can be used when the opening is bigger than 1,20m, when pallet trucks – clarks enter the cold room and in cases that the personnel has to open the doors very often. They are perfect for industries large cargo and in facilities where the continuous opening the door is required. The specifications and the manufacturing method applied make them ideal for food industries such as fruit packaging units, meat industries, dairies, logistics and more. The stainless steel double leaf sliding cold storage doors by amp are divided in categories depending on the temperature required. They can be installed in both chiller and freezer rooms.

MOD S808TP2 up to 0° C
MOD S809TP2 up to -2° C
MOD S809TL2 up to -25° C
MOD S812TXL2 up to -30° C
MOD S812TXXL2 up to -40° C

Additional Information:
– Stainless steel angle – shaped frame, reinforced from the inside with heavy duty, robust PVC, with modern German design and high mechanical strength.
– Standard door leaf with Polyurethane insulation supplied from BAYER of density 42 kg/m³. Door surface made from German stainless steel sheets 304 or inox with circular design.
– Slide mechanism of modern design, exceptional sliding properties. Very soft closing and easy disengagement. Slide mechanism cover made from Stainless steel 304 or inox with circular design.
– Standard stainless steel 304 side panel, adapted to panels. It ensures perfect adhension at the gaskets, without extra components on the floor.
– External shutter Inox 304 of modern design, extra heavy duty lever.
– Border gaskets, insulating properties with Beehive cells and perfect adhesion, and with door heating element installed for the defrosting.

Five (5) year guarantee is included in the prices.

Applications: pharmaceutical industry, hospitals, clinics, clean rooms, surgeries, food preparation workshops.

– Stainless steel handle mechanism in U-shape.
– Lock & hinges.
– Modern design and construction for soft, easy and noiseless closing without problems.
– Single section (monoblock) door.
– Polyurethane insulation thickness of 40 mm from BAYER Germany.
– Stainless steel frame reinforced with German polyethylene by Roechling.
– Door surface inox stainless steel 304 or with circular design.
– Border gaskets of german origin, insulating properties with Beehive cells and perfect adhesion.
– Certified with Certificate of EU Food Contact Compliance 2002/72/EC.

Special rubber gasket for clean room doors
In order to meet the specifications for clean room doors, for areas for the manufacturing of drugs, surgeries, hospitals the gap between the door and the floor should be sealed, preventing the transportation of air, smoke, dust and sound.
It includes an aluminum profile guide, EPDM rubber (resistant to temperatures from – 35° to + 90°) and supporting materials well reinforced to withstand more than 200,000 door openings-closings.
The mechanism works with a switch which regulates the movement of the profile with the rubber, thus adapting to the floor every time you open and close the door.

Stainless steel flip – flap doors MOD SFFPU2 of double leaf with BAYER Germany polyurethane insulation, free of chlorofluorocarbons (CFC & HCFC FREE), with sound insulation and thermal insulation properties.

The thickness of the door is 40mm, and the door surface is made from German steel sheets Stainless steel 304 or inox with circular design.

A special insulating EPDM rubber with excellent grip is placed on the outer perimeter of the door. Another special rubber is placed at the middle of the two leaves that allows the correct opearation of the door, adhesion between the leaves and offers finger protection.

It is adapted to the panel with a stainless steel angle – shaped frame, reinforced from the inside with heavy duty, robust PVC, with modern German design and high mechanical strength, embracing solidly the panel on which the leaves of the door are mounted. They open inside-out and close immediately “after passing”, blocking the passage of insects, dust, odors & other and they remain open to 90 degrees angle.

Each door has fixed oval porthole mounted and has special protection ails (bumpers) from polyethylene, under the porthole, inside – out. This material is extremely resistant to impact and to grease and acids and is of modern design and aesthetics.

– Double leaf stainless steel service doors with German polyurethane insulation thickness of 40 mm, made from stainless steel sheets 304 or with circular design, standard lock & – stainless steel U-shape handle.
– Stainless steel frame reinforced with German polyurethane by Roechling for panel or wall thicknesses of 60mm up to 140 mm.
– Modern construction & aesthetic, is an advantage of service doors as well as hygienic surfaces with no spaces for dust & microbes to form.
– Amp sound & thermal insulated doors suitable for offices, food preparation areas, locker rooms, WC, laboratories, warehouses, industry etc.
– Possibility of construction of any dimension requested, with or without window with internal protection bar and immediate delivery.

Double leaf service doors are used in areas with a positive temperature (therefore T>0°C), to:
• divide areas for the drugs processing, or areas for the blood processing and freezing in offices
• divide noisy areas (soundproof door) from the ones that must be deafened (for example in hospitals)
• divide cold areas (thermo-insulating door) from the ones used as offices
• divide projecting areas from the one used as offices, for example in the Communication and IT industry
• divide hygienic areas (toilettes, showers) from the dressing room

The service doors are being manufactured and tested before shipment by industrial refrigeration manufacturer AMP at its own facilities (16.000 m²) in Kryoneri Attica Greece.

Applications: pharmaceutical industry, hospitals, clinics, clean rooms, surgeries, food preparation workshops.

– Stainless steel handle mechanism in U-shape.
– Lock & hinges.
– Modern design and construction for soft, easy and noiseless closing without problems.
– Single section (monoblock) door.
– Polyurethane insulation thickness of 40 mm from BAYER Germany.
– Stainless steel frame reinforced with German polyethylene by Roechling.
– Door surface inox stainless steel 304 or with circular design.
– Border gaskets of german origin, insulating properties with Beehive cells and perfect adhesion.
– Certified with Certificate of EU Food Contact Compliance 2002/72/EC.

Special rubber gasket for clean room doors
In order to meet the specifications for clean room doors, for areas for the manufacturing of drugs, surgeries, hospitals the gap between the door and the floor should be sealed, preventing the transportation of air, smoke, dust and sound.
It includes an aluminum profile guide, EPDM rubber (resistant to temperatures from – 35° to + 90°) and supporting materials well reinforced to withstand more than 200,000 door openings-closings.
The mechanism works with a switch which regulates the movement of the profile with the rubber, thus adapting to the floor every time you open and close the door.

Stainless steel flip – flap doors MOD SFFPU with BAYER Germany polyurethane insulation, free of chlorofluorocarbons (CFC & HCFC FREE), with sound insulation and thermal insulation properties.

The thickness of the door is 40mm, and the door surface is made from German steel sheets Stainless steel 304 or inox with circular design.

A special insulating EPDM rubber with excellent grip is placed on the outer perimeter of the door. Another special rubber is placed at the middle of the two leaves that allows the correct opearation of the door, adhesion between the leaves and offers finger protection.

It is adapted to the panel with a stainless steel angle – shaped frame, reinforced from the inside with heavy duty, robust PVC, with modern German design and high mechanical strength, embracing solidly the panel on which the leaves of the door are mounted. They open inside-out and close immediately “after passing”, blocking the passage of insects, dust, odors & other and they remain open to 90 degrees angle.

Each door has fixed oval porthole mounted and has special protection ails (bumpers) from polyethylene, under the porthole, inside – out. This material is extremely resistant to impact and to grease and acids and is of modern design and aesthetics.

– Stainless steel service doors with German polyurethane insulation thickness of 40 mm, made from stainless steel sheets 304 or with circular design, standard lock & – stainless steel U-shape handle.
– Stainless steel frame reinforced with German polyurethane by Roechling for panel or wall thicknesses of 60mm up to 140 mm.
– Modern construction & aesthetic, is an advantage of service doors as well as hygienic surfaces with no spaces for dust & microbes to form.
– Amp sound & thermal insulated doors suitable for offices, food preparation areas, locker rooms, WC, laboratories, warehouses, industry etc.
– Possibility of construction of any dimension requested, with or without window with internal protection bar and immediate delivery.

Service doors are used in areas with a positive temperature (therefore T>0°C), to:
• divide areas for the drugs processing, or areas for the blood processing and freezing in offices
• divide noisy areas (soundproof door) from the ones that must be deafened (for example in hospitals)
• divide cold areas (thermo-insulating door) from the ones used as offices
• divide projecting areas from the one used as offices, for example in the Communication and IT industry
• divide hygienic areas (toilettes, showers) from the dressing room

The service doors are being manufactured and tested before shipment by industrial refrigeration manufacturer AMP at its own facilities (16.000 m²) in Kryoneri Attica Greece.

REQUEST A QUOTE