Electric Sliding Door



The Electric Sliding Door for chiller & freezer cold storage rooms are manufactured at our facilities, utilizing the German know-how that we have acquired collaborating with the biggest German raw materials manufacturers of the sector. Our experience in combination with the excellent quality german raw materials & state-of-art latest technology equipment & handmancraft allow us to manufacture doors of high endurance & thermal insulated according to the European HACCP regulations and with the necessary CE certifications.

MOD 808TP-E up to 0° C
MOD 809TP-E up to -2° C
MOD 809TL-E up to -25° C
MOD 812TXL-E up to -30° C
MOD 812TXXL-E up to -40° C

A. Automatic activation of sliding door via a mechanism with a motor connected to a multifunction panel. Switchgear IP 56 is suitable for installation in a moist environment and includes an electronic circuit for controlling the functions and an inverter to control the paths during operation of the opening-closing and the necessary needs in electrical power in respect to the security settings.

B. All automation system is pre-cabled therefore the connection of the board becomes easy through a multipolar connector which is located at the bottom of the board. There are already pre-installed factory settings which are easily changed depending on the needs of each user.

C. Speed is set to 0,27 m/sec (as per regulations) and the engine has a reversible reducer. The speed can change easily from the board.

D. The primary safety device for crash protection is a sensitive bar resistant type, located on the vertical edge of the door panel, which in case of impact with an obstacle, automatically stops the door and reverses motion.

E. The controls of the STOP (end of movement) during the opening and closing is activated by a micro switch. The transmission is through a chain with adjustable power and not with tapes for cost reasons with breakage problems.

F. A yellow light is flashing signals that the door is in motion. Besides the many arrangements for opening – closing the door from the board, two cords connected to switches are placed in front and behind the door (at desired distances) to facilitate the operator of the forklift at the entrance and exit of the cold room.

G. In case of power failure the door is operated manually.

Based on the specialized quality control department, we offer PVC frame-counter frame (CPR system) & a wide range of color selection at plastisol sanisteel colours (foodsafe steel sheets). The automated sliding cold storage doors are being manufactured by industrial refrigeration manufacturer AMP at its own facilities (16.000 m²) in Kryoneri Attica Greece.


Project Photos



I am interested!

    You can read our Privacy Policy here.